Recent work
Ian's recent jobs
Photos and write-ups of jobs Ian has done recently on AGA and Rayburn cookers and their locations.
Recent work
Some of Ian's jobs from the last few weeks
Annual service and insulation top-up on a gas AGA in Sedgley
An annual service on a gas AGA in Sedgley. The insulation was very low, so Ian topped it up and fitted a new top blanket and new hob and simmer spot ropes.
New flue spillage stat on a gas AGA in Albrighton
A gas AGA in Albrighton kept tripping out. Ian found a faulty flue spillage stat during the annual service, fitted a new one and ran the usual tests.
Routine service on a gas Rayburn 200G in Alrewas
A routine service on a gas Rayburn 200G in Alrewas. The flue was clear, the gas pressures were correct, the flame picture was good and the flue draught was perfect.
New gas valve and service on an LPG AGA DC3G
An annual service on an LPG AGA in Baxterley. The gas control valve was letting by, so Ian replaced it, recommissioned the cooker and checked the flue, burner pressure and electrical load.
Pilot assembly and ignition repair on a propane AGA
A propane AGA in Atherstone that wasn't working. Ian replaced the pilot assembly and ignition components, traced the flue to the right chimney and put the cooker back into service.
New gas valve and service on a conventional flue gas AGA
A service on a gas AGA in Edgbaston, with a new gas valve, pilot assembly, thermocouple, gas cock and door ropes. All the pressures are correct and it's running safely.
Service on a gas 4-oven power flue AGA
Servicing a gas 4-oven power flue AGA in Castle Bromwich. No corrosion on the flue sensors, the flue cleared out and the fan checked. All good.
Gas Rayburn that kept locking out
It kept locking out. An annual service and a flue stat clip adjustment later, it lights first time with a perfect flame picture, ready for winter.
New thermocouple and annual service on a gas AGA
A new thermocouple and the annual service for a much-loved AGA belonging to a regular customer in Stourbridge. A toasty home, ready for the winter.
New circuit board fan and element on a 13 amp electric AGA
A 13 amp electric AGA in Wolverhampton with a dead circuit board fan. Ian fitted a new fan, a new printed circuit board and a new element.
Moving a customer's own gas Rayburn into their new kitchen
A customer in Telford brought their Rayburn from their old house. Ian fitted it in the new kitchen, with the cabinet work, flue, gas pipes and electrics.
New oil-fired Rayburn 480K replacing a worn 380K
An old Rayburn 380K in Stourbridge swapped for a new 480K, with a wireless programmable room thermostat, S Plan plumbing and a new flue liner and terminal.
A blue AGA re-enamelled cream to suit a new kitchen
A blue AGA in Staffordshire re-enamelled to go with a new kitchen, with new lid liners, domes, lid cords, door backs, door ropes and oven tunnels.
Need an AGA engineer?
Ring Ian, seven days a week.